Home ProductsVGATE OBD2 Scanner

Vgate VS450 VAG 450 Automotriz Scaner For VW Volkswagen Audi OBDII Code Reader Diagnostic Tool PK VAS5054 ODIS UDS

Vgate VS450 VAG 450 Automotriz Scaner For VW Volkswagen Audi OBDII Code Reader Diagnostic Tool PK VAS5054 ODIS UDS

    • Vgate VS450 VAG 450 Automotriz Scaner For VW Volkswagen Audi OBDII  Code Reader Diagnostic Tool PK VAS5054 ODIS UDS
    • Vgate VS450 VAG 450 Automotriz Scaner For VW Volkswagen Audi OBDII  Code Reader Diagnostic Tool PK VAS5054 ODIS UDS
    • Vgate VS450 VAG 450 Automotriz Scaner For VW Volkswagen Audi OBDII  Code Reader Diagnostic Tool PK VAS5054 ODIS UDS
  • Vgate VS450 VAG 450 Automotriz Scaner For VW Volkswagen Audi OBDII  Code Reader Diagnostic Tool PK VAS5054 ODIS UDS

    Product Details:

    Place of Origin: China
    Brand Name: Vgate
    Certification: CE
    Model Number: VS450

    Payment & Shipping Terms:

    Minimum Order Quantity: 1pc
    Price: $25-35 per pc(EXW)
    Packaging Details: 10*10*10cm
    Delivery Time: 2-5 days
    Payment Terms: T/T, Western Union, paypal
    Supply Ability: 1000pcs per week
    Contact Now
    Detailed Product Description
    Brand Name: Vgate Model Number: VS450
    Function: Diagnostic Tool Version: The Newest Version
    Work: VW Volkswagen Audi Function 1: Car Diagnostic Tool
    Function 2: CAN OBDII SCAN TOOL Better Than ELM327 V1.5 Item Type: Code Readers & Scan Tools
    Package: Standard Package

    Vgate VS450 VAG 450 Automotriz Scaner For VW Volkswagen Audi OBDII Code Reader Diagnostic Tool PK VAS5054 ODIS UDS

     

    VGATE VS450 Features and Benefits:

    note: check your vehicle work protocols including VS450 support obd protocols list or not, this is very important.

    ·Work for VAG

    · Read and erase Diagnostic Trouble Codes (DTCs) of engine, ABS,airbag, transmission, radio, climate control(A/C), cent., elect., steering wheel,instruments, immobilizer, etc. (18 Systems)
    · Read and clear generic trouble codes of cars using ISO 9141-2 (CARB),ISO 14230 (KWP-2000) and ISO-15765 (CAN) protocols
    · Turn off MILs of engine, airbag, ABS , A/T and most other systems
    · CAN (Controller Area Network) capability
    · Reset oil service light
    · Retrieve vehicle information (VIN)
    · Display I/M Readiness Status
    · Display DTC definitions on unit screen
    · System upgradeable via the internet
    · Highly reliable and accurate
    · Easy to use with friendly interface
    · Safely communicates with the on-board computers.
    · Large, easy-to-read backlit LCD
    · Stand-alone unit with no need for an additionallaptop computer to operate
    · One-year warranty against defects.

     

    VGATE VS450 Contents Included
    1. VS450 Product
    2. Carry Case
    3. Nlony bag
    4. manual

     

    FAQ Area before order:


    1. Vehicle Linking Error?

    A communication error occurs if the scan tool fails to communicate with the vehicle’s ECU (Engine Control Unit). You need to do the following to check up:
    Verify that the ignition is ON.
    Check if the scan tool’s connector is securely connected to the vehicle’s DLC.
    Verify that the vehicle is OBD2 compliant.
    Turn the ignition off and wait for about 10 seconds. Turn the ignition back to on and continue the testing.
    Verify the control module is not defective.

    2. Operating Error?

    If the scan tool freezes, then an exception occurs or the vehicle’s ECU (Engine Control Unit) is too slow to respond to requests. You need to do the following to reset the tool:
    Reset the scan tool.
    Turn the ignition off and wait for about 10 seconds. Turn the ignition back to on and continue the testing.

    3. Scan tool doesn’t power up?

    If the scan tool won’t power up or operates incorrectly in any other way, you need to do the following to check up:
    Check if the scan tool’s connector is securely connected to the vehicle’s DLC;
    Check if the DLC pins are bent or broken. Clean the DLC pins if necessary.
    Check vehicle battery to make sure it is still good with at least 8.0 volts.

    4. LED lamps not working?

    If you turn on the scan tool and perform the I/M Readiness test but the LED lamps are not working, there may be several possible causes, including bad connection and ignition off. In this case, follow these steps to check the scan tool.
    Make sure the cable is connected to the DLC securely.
    Verify the ignition key is in the KOER position.
    Run the LED Test in the System Setup menu. If the scan tool did not pass this test, there is a problem with the LED lamp. Please contact us

     
    5. Where's Our vehilcle OBD Interface (Port) ?
     

    VGATE VS450 Contents Included
    1. VS450 Product
    2. Carry Case
    3. Nlony bag
    4. manual

     

    FAQ Area before order:


    1. Vehicle Linking Error?

    A communication error occurs if the scan tool fails to communicate with the vehicle’s ECU (Engine Control Unit). You need to do the following to check up:
    Verify that the ignition is ON.
    Check if the scan tool’s connector is securely connected to the vehicle’s DLC.
    Verify that the vehicle is OBD2 compliant.
    Turn the ignition off and wait for about 10 seconds. Turn the ignition back to on and continue the testing.
    Verify the control module is not defective.

    2. Operating Error?

    If the scan tool freezes, then an exception occurs or the vehicle’s ECU (Engine Control Unit) is too slow to respond to requests. You need to do the following to reset the tool:
    Reset the scan tool.
    Turn the ignition off and wait for about 10 seconds. Turn the ignition back to on and continue the testing.

    3. Scan tool doesn’t power up?

    If the scan tool won’t power up or operates incorrectly in any other way, you need to do the following to check up:
    Check if the scan tool’s connector is securely connected to the vehicle’s DLC;
    Check if the DLC pins are bent or broken. Clean the DLC pins if necessary.
    Check vehicle battery to make sure it is still good with at least 8.0 volts.

    4. LED lamps not working?

    If you turn on the scan tool and perform the I/M Readiness test but the LED lamps are not working, there may be several possible causes, including bad connection and ignition off. In this case, follow these steps to check the scan tool.
    Make sure the cable is connected to the DLC securely.
    Verify the ignition key is in the KOER position.
    Run the LED Test in the System Setup menu. If the scan tool did not pass this test, there is a problem with the LED lamp. Please contact us

     
    5. Where's Our vehilcle OBD Interface (Port) ?
    Vgate VS450 VAG 450 Automotriz Scaner For VW Volkswagen Audi OBDII  Code Reader Diagnostic Tool PK VAS5054 ODIS UDS

    6. What's Mean About OBD 16pin Port and OBD Fault Erro Code?

    Vgate VS450 VAG 450 Automotriz Scaner For VW Volkswagen Audi OBDII  Code Reader Diagnostic Tool PK VAS5054 ODIS UDS

    Vgate VS450 VAG 450 Automotriz Scaner For VW Volkswagen Audi OBDII  Code Reader Diagnostic Tool PK VAS5054 ODIS UDS

     

    Vgate VS450 VAG 450 Automotriz Scaner For VW Volkswagen Audi OBDII  Code Reader Diagnostic Tool PK VAS5054 ODIS UDS

    Vgate VS450 VAG 450 Automotriz Scaner For VW Volkswagen Audi OBDII  Code Reader Diagnostic Tool PK VAS5054 ODIS UDSVgate VS450 VAG 450 Automotriz Scaner For VW Volkswagen Audi OBDII  Code Reader Diagnostic Tool PK VAS5054 ODIS UDS

     

     

     

     

    Contact Details
    ShenZhen Changdashun Technology Co., Ltd.

    Contact Person: Mr. Deo Lee

    Tel: 86-755-26645692

    Send your inquiry directly to us (0 / 3000)

    Other Products

    Contact

    Address: 908-909,Zhenhua Times Square, Heping Road No. 21, Longhua District, Shenzhen

    Factory Address:417 Building 4, NO 2 Industrial Zone, Zhuguang Xili Nanshan District Shenzhen China